ETERNUS Web GUI User’s Guide
135
Copyright 2011 FUJITSU LIMITED
P2X0-1090-02ENZ0
Chapter 7
Thin Provisioning Pool Management
This chapter describes Thin Provisioning Pool management.
7.1
Thin Provisioning Pool Status
Thin Provisioning Pool status displays the following status information:
•
Thin Provisioning Pool (Basic Information)
•
Thin Provisioning Pool (Threshold)
•
Thin Provisioning Pool (ECO Mode Schedule)
•
Thin Provisioning Pool (License)
Detailed information of the Thin Provisioning Pools can be displayed from the following screen:
•
Thin Provisioning Pool Detail (Basic)
7.1.1
Thin Provisioning Pool (Basic Information)
This function shows the list of TPPs.
•
Registering the license for the Thin Provisioning feature is required to
use the Thin Provisioning function. To check the registration status of
the license, refer to
"7.1.4 Thin Provisioning Pool (License)" (page 141)
•
When "
Attention" or "
Warning" is displayed in "Used Status" in
the TPP list, the TPP used capacity exceeds the threshold. Add drives
immediately to expand the TPP capacity.
•
This function shows the TPP basic information, a list of the RAID groups
that configure the TPP, a list of the TPVs that are registered in the TPP,
and TPP diagnosis information.
•
To check the threshold for monitoring the used capacity of a TPP, refer
to
"7.1.2 Thin Provisioning Pool (Threshold)" (page 137)
•
To check the ECO mode settings of a TPP, refer to
Provisioning Pool (ECO Mode Schedule)" (page 139)
.