Fujitsu ETERNUS LT270 S2, Руководство пользователя - Управление панелью

Страница: 116 / 168

Chapter 3 Remote Panel Operation
3.11 Setting Library Information
FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation-
Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0
116
Figure 3.35 Network information setting window (DHCP disabled)
2
Set each of the following items:
Table 3.31 Network information setting items
Setting item Explanation
Enable IPv4 Specify whether the IP address setting in IPv4 format is enabled or disabled.
At least one of the settings for IPv4 or IPv6 must be enabled.
When the IP address setting in IPv4 format is disabled, the settings related to IPv4
are also disabled.
Enable DHCP Specify whether the DHCP is enabled or disabled.
When the DHCP is enabled, all fields other than the NTP Server field are
automatically set and cannot be entered.
IP Address Enter the IP address of the LT270 S2 in IPv4 format.
Only numeric characters can be entered.
Subnet Mask Enter the subnet mask of the LT270 S2.
Only numeric characters can be entered.
Gateway This item needs to be set if accessed from outside SUB-LAN or accessed from the
browser via a proxy server inside SUB-LAN.
Only numeric characters can be entered.