Fujitsu ETERNUS LT20 S2, Установка, запуск и обслуживание

Страница: 13 / 118

ETERNUS LT20 S2
13
Product Description Front Panel
2.1 Front Panel
The front of the ETERNUS LT20 LTO library is used to access the power button,
operator control panel (OCP) with four push button switches and LCD display,
the LEDs, the left and right magazines and the mailslot.
Figure 2: Front panel
No. Description
1 Left magazine with mailslot.
2 Power button.
Pressing the button will initiate a controlled Power Down of the unit
(soft power down).
3 LED "READY" (Green).
Illuminated when power is on. Blinking when there is tape or library
robots activity.
4 LED "CLEAN" (Amber).
Illuminated when the tape drive has determined that a cleaning
cartridge should be used. Cleaning is only necessary when the library
directs you to do so. Additional cleaning is not necessary.
5 LED "ATTENTION" (Amber).
Illuminated if the library has detected a condition that requires attention
by the operator.
6 LED "ERROR" (Amber).
Illuminated if an unrecoverable tape drive or library error occurs. A
corresponding error message displays on the LCD screen (see for
more information).