manualshive.com logo in svg

Fujitsu ETERNUS LT140, Руководство пользователя

Поделиться
Скачать
Fujitsu ETERNUS LT140 Скачать руководство пользователя страница 50

Chapter 4  Setting Backup Software
  4.6  Arcserve Backup

FUJITSU Storage ETERNUS LT140 Tape Library User’s Guide -Server Connection-

Copyright 2019 FUJITSU LIMITED

P3AG-3752-03ENZ0

50

4.6

Arcserve Backup

This section provides notes about the settings that are performed for Arcserve Backup.

4.6.1

Notes on Operation

■

Cleaning tape drives

•

Arcserve Backup has a function to automatically clean tape drives. When automatically cleaning tape 
drives, use the Arcserve Backup's automatic cleaning function.

•

Arcserve Backup can display the number of times each drive has been cleaned. It cannot display the 
number of times each cleaning cartridge has been used.

4.6.2

Notes on Using Windows

A dedicated driver is used (this driver is automatically installed during installation of Arcserve Backup). Do not
use an IBM tape driver.

4.7

Veeam Backup & Replication

This section provides notes about the settings that are performed for Veeam Backup & Replication.

4.7.1

Notes on Operation

■

Cleaning tape drives

Veeam Backup & Replication does not have a function to manually clean tape drives. Use the tape library to
manually clean the tape drives.

■

Label of a data cartridge

Veeam recognizes any media with a barcode label whose first three letters are "CLN" or "CLR" as cleaning
media. Therefore, if the first three letters of the barcode label of a data cartridge are set to "CLN" or "CLR", that
data cartridge becomes unavailable.

■

Automatically cleaning the tape library

If the tape library's automatic cleaning function conflicts with a Veeam backup or restore operation, a drive
error occurs in Veeam. Therefore, do not use the tape library's automatic cleaning function.

Содержание ETERNUS LT140























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды