Chapter 1 System Management
1.6 Eco-mode Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED
P2X0-1270-13ENZ0
79
4
Click the [Apply] button.
The event is added to the "Event List".
5
to configure multiple events.
6
After adding all the events, click the [Set] button.
A confirmation screen appears.
7
Click the [OK] button.
Creation of the Eco-mode schedule starts.
8
Click the [Done] button to return to the [Eco-mode] screen.
End of procedure
•
When deleting the added event, select the event, and click the [Delete] button.
•
When changing the added event, select the event, and click the [Edit] button.
If an error screen appears under the following conditions, check the parameter settings.
•
"Schedule Name" has not been entered
•
"Schedule Name" matches with an existing schedule name
Содержание Eternus DX200F
Страница 2: ...This page is intentionally left blank ...
Страница 1082: ......