Fujitsu ETERNUS CS800 Скачать руководство пользователя страница 592

Страница: 592 / 604

The decompression engine for RAR archives was developed using source

code of unRAR program.

All copyrights to original unRAR code are owned by Alexander Roshal.

The license for original unRAR code has the following restriction:

The unRAR sources cannot be used to re-create the RAR compression

algorithm, which is proprietary. Distribution of modified unRAR sources

in separate form or as a part of other software is permitted, provided

that it is clearly stated in the documentation and source comments that

the code may not be used to develop a RAR (WinRAR) compatible archiver.

Pbzip2 License

The library "libbzip2" which pbzip2 uses, is copyright

Redistribution and use in source and binary forms, with or without

modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice,

this list of conditions and the following disclaimer.

2. The origin of this software must not be misrepresented; you must not

claim that you wrote the original software. If you use this

software in a product, an acknowledgment in the product documentation would

be appreciated but is not required.

3. Altered source versions must be plainly marked as such, and must not be

misrepresented as being the original software.

592

ETERNUS CS800

Содержание ETERNUS CS800





























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ETERNUS CS800

Отзывы:

Похожие инструкции для ETERNUS CS800

Бренды по названию

Популярные бренды

Fujitsu ETERNUS CS800, Руководство пользователя

Результаты поиска

Содержание ETERNUS CS800

Отзывы:

Похожие инструкции для ETERNUS CS800

Бренды по названию

Популярные бренды