Fujitsu ETERNUS CS800 Скачать руководство пользователя страница 534

Страница: 534 / 604

rights granted under applicable copyright law includes additional rights

not granted under this License, such additional rights are deemed to be

included in the License; this License is not intended to restrict the

license of any rights under applicable law.

Creative Commons Notice

Creative Commons is not a party to this License, and makes no warranty

whatsoever in connection with the Work. Creative Commons will not be liable

to You or any party on any legal theory for any damages whatsoever,

including without limitation any general, special, incidental or

consequential damages arising in connection to this license.

Notwithstanding the foregoing two (2) sentences, if Creative Commons has

expressly identified itself as the Licensor hereunder, it shall have all

rights and obligations of Licensor.

Except for the limited purpose of indicating to the public that the Work is

licensed under the CCPL, Creative Commons does not authorize the use by

either party of the trademark "Creative Commons" or any related trademark

or logo of Creative Commons without the prior written consent of Creative

Commons. Any permitted use will be in compliance with Creative Commons'

then-current trademark usage guidelines, as may be published on its website

or otherwise made available upon request from time to time. For the

avoidance of doubt, this trademark restriction does not form part of this

License.

Creative Commons may be contacted at

http://creativecommons.org/

GNU General Public License

Version 2, June 1991

51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA

Everyone is permitted to copy and distribute verbatim

copies of this license document, but changing it is not allowed.

Preamble

The licenses for most software are designed to take away your freedom to

share and change it. By contrast, the GNU General Public License is

intended to guarantee your freedom to share and change free software--to

make sure the software is free for all its users. This General Public

License applies to most of the Free Software Foundation's software and to

534

ETERNUS CS800

Содержание ETERNUS CS800





























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ETERNUS CS800

Отзывы:

Похожие инструкции для ETERNUS CS800

Бренды по названию

Популярные бренды

Fujitsu ETERNUS CS800, Руководство пользователя

Результаты поиска

Содержание ETERNUS CS800

Отзывы:

Похожие инструкции для ETERNUS CS800

Бренды по названию

Популярные бренды