Fujitsu ETERNUS CS800 S6, Руководство пользователя

Страница: 326 / 561

10.9 System
security scanners stating that the server you are attempting to connect to does not match
the server embedded within the certificate.
This is expected behavior because the default certificate can only be used for encryption
and not server authentication. Fujitsu Technology Solutions recommends the default
Fujitsu Technology Solutions certificate be replaced with your own official certificate
specific to your ETERNUS CS800 system. You can install your own custom certificate in
order to take advantage of server authentication in addition to encrypted communication.
To suppress server authentication warnings for the default certificate:
l
Internet Explorer - If a dialog box displays warning you of a possible certificate error,
add the IP address for the Fujitsu Technology Solutions to the Trusted Sites list ( Tools
> Internet Options > Security > Trusted Sites ). If subsequent warning pages display
along with an option to close your Web browser or continue to the Web site, click
Continue . This suppresses the warnings until you restart your Web browser.
l
Firefox - If the Secure Connection Failed dialog box displays, click the link at the
bottom of the dialog box and follow the instructions to add an exception for your
ETERNUS CS800
Installing an SSL Certificate
You can purchase and install your own custom SSL certificate in order to take advantage
of server authentication in addition to encrypted communication on the ETERNUS CS800.
To install an SSL certificate:
1. Under Certificate , click New .
The Install New Certificate page displays (see "Install New Certificate Page" on page
326 ).
Figure 230: Install New Certificate Page
2. In the Certificate File box, type the location and filename of the new SSL certificate
file.
Or click Browse to browse the system and locate the SSL certificate file. The SSL
certificate file must be named server.crt .
3. Click Upload .
ETERNUS CS800 326