Fujitsu ESPRIMO P556, Руководство по эксплуатации

Страница: 16 / 50

Getting started
Setting up the device
Workstation Ergonomic Device
When installing your device, please read the recommendations and safety
notes in the "Safety/regulations" manual.
We recommend that you place your device on a surface which is not slippery. In
view of the many different
fi nishes and varnishes used on furniture, it is possible
that the rubber feet will mark the surface they stand on.
Depending on the location of your device, bothersome vibrations and noises may
occur. To prevent this, a distance of at least 10 mm / 0.39" should be maintained
from other devices on casing sides without ventilation surfaces.
In order to avoid overheating, do not cover the ventilation areas
of the monitor or the device.
A minimum distance of 200 mm / 7.87" from the device must be
observed for ventilation areas.
Do not stack several devices on top of each other.
Do not expose the device to extreme ambient conditions (see "Technical
speci fi cation", Page 43 , section "Ambient conditions"). Protect the
device against dust, humidity and heat.
Operating position
Use the device only in the vertical operating position.
Connecting the device to the mains supply
Mainsadapter
2
1
► Connect the power cable to the device (1).
► Plug the power plug into a grounded mains outlet (2).
12 Fujitsu