Fujitsu ESPRIMO P5 Series, Руководство по эксплуатации

Страница: 33 / 52

Getting started
Switching on for the first time: installing the software
Installing, Software, Installing,
Once the installation has been started the device must not be switched
off, unless the installation has been completed.
During installation, the device may only be rebooted when you are requested to do so!
The installation will otherwise not be carried out correctly and the contents
of the hard disk must be completely restored.
If the device is integrated into a network, the user and server details as well as
the network protocol are required during the software installation.
Contact your network administrator if you have any questions about these settings.
When you switch on the device for the fi rst time, the supplied software
is installed and con fi gured. Plan a reasonable amount of time for this,
as this process must not be interrupted.
Switch on the monitor and the machine
In order to avoid overheating, do not cover the ventilation areas
on the monitor or the device.
► Switch on the monitor (see operating instructions for the monitor).
► Press the on/off button on the front of the machine.
The operational display will light up and the machine will start.
Fujitsu 29