Operation
Indicators on the device
The indicators are on the front of the casing. Which indicators are available on your
device depends on the con
fi
guration level you have selected.
1
2
3
4
1
No.
indicator
Description
1
Drive indicators
The indicator lights up when the CD-ROM or DVD drive of the
device is accessed. You must never under any circumstances
remove the CD/DVD while the indicator is lit.
2
Indicator for optional
components, e.g.
SmartCard reader
The indicator lights up when the optional component, e.g. the
SmartCard reader, is accessed.
3
Power-on indicator
Warning:
In the energy saving mode, the device must not be
disconnected from the mains, as this can result in a loss of data.
•
Indicator is illuminated:
The device is switched on.
•
The indicator
fl
ashes (depending on device type):
The device is in energy-saving mode. After being switched on
with the ON/OFF switch, the device powers up or returns to the
state it was in before it entered energy-saving mode.
•
The indicator is not illuminated:
The device is switched off or disconnected from the mains. If
the device is ready for operation, it can be switched on with
the ON/OFF switch.
4
Hard disk indicator
The indicator lights up when the hard disk drive of the device is
accessed.
32
Fujitsu
Содержание ESPRIMO P5 Series
