Fujitsu ESPRIMO E4 Series Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 62

background image

Getting started

Connecting external devices to the serial interface

Serialinterface

Serialinterface,

Externaldevices,

Devices,

External devices can be connected to the serial interface (e.g. a printer or modem).

►

Connect the data cable to the external device.

►

Connect the data cable to the corresponding serial interface.



For an exact description of how to connect external devices to the corresponding
port, please see the external device documentation.

Port settings

Serialinterface,

You can change the port settings (e.g. address, interrupt) in the

BIOS Setup

.

Device drivers

Device drivers,

The devices connected to the serial interface require drivers. Your operating system
already includes many drivers. If the required drive is missing, install it. The latest
drivers are usually available on the Internet or will be supplied on a data carrier.

Connecting external devices to the USB ports

USBdevices,

USBport,

Externaldevices,

Devices,

You can connect a wide range of external devices to the USB ports (e.g.
printer, scanner, modem or keyboard).

USB devices are hot-pluggable. This means you can connect and disconnect
USB cables while your device is switched on.

Additional information can be found in the documentation for the USB devices.

►

Connect the data cable to the external device.

►

Connect the data cable to one of the USB ports on your device.

Device drivers

The external USB devices you connect to the USB ports usually require no driver of their
own, as the required software is already included in the operating system. If the device
requires separate software, please note the information in the manufacturer’s manual.

To ensure the transmission capacity of USB 2.0, the cable from the external USB device
to the USB port of your device must not be longer than 3 m / 118,11 inch.

Fujitsu

21

«
...
23
24
25
26
27
...
»

Содержание ESPRIMO E4 Series































































Отзывы:

Нет отзывов

Похожие инструкции для ESPRIMO E4 Series

Бренд: Gateway Страницы: 42

Бренд: Acer Страницы: 118

UC-8100-ME-T Series

Бренд: Moxa Technologies Страницы: 22

Бренд: IBM Страницы: 314

Бренд: IBM Страницы: 74

EPC-C301 Series

Бренд: Advantech Страницы: 80

Ferrari 1000 Series

Бренд: Acer Страницы: 123

Бренд: Acer Страницы: 112

Mephisto Polgar

Бренд: Hegener+Glaser Страницы: 19

Бренд: Dell Страницы: 53

VAIO VPCCW2MFX/PU

Бренд: Sony Страницы: 2

VAIO VPCCW2MGX/B

Бренд: Sony Страницы: 2

VAIO VPCCW2HGX/B

Бренд: Sony Страницы: 2

VAIO VPCCW2JGX/B

Бренд: Sony Страницы: 2

VAIO VPCCW2KGX/B

Бренд: Sony Страницы: 2

VAIO VPCCW2GGX/B

Бренд: Sony Страницы: 2

VAIO VPCCW2EGX/B

Бренд: Sony Страницы: 2

VAIO VPCCW2FGX/B

Бренд: Sony Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды