Fujitsu ESPRIMO D5 Series Скачать руководство пользователя

Страница: 28 / 83

Operation

Switch the device on

►

If necessary, switch the monitor on (see the operating manual for the monitor).

Device

Monitor

►

Press the ON/OFF switch on the front of the device.

The power indicator glows and the device is started.

Switching off the device

Switching the device off does not disconnect it from the mains voltage. To completely
disconnect the mains voltage, remove the power plug from the power socket.

►

Shut down the operating system in the proper way.

Device

Monitor

The devices switches to power saving mode automatically and switches off.

Procedure in an emergency

If the device cannot be switched off, you can force a shutdown by
using the following emergency procedure.

Warning, this could lead to a loss of data!

►

Press the ON/OFF switch for at least 4 seconds.

The device will switch off.
When you next restart the device, error messages may be displayed
due to the improper shutdown.

Fujitsu

Содержание ESPRIMO D5 Series




















































































Результаты поиска

Содержание ESPRIMO D5 Series

Отзывы:

Похожие инструкции для ESPRIMO D5 Series

Бренды по названию

Популярные бренды

Fujitsu ESPRIMO D5 Series, Руководство по эксплуатации

Результаты поиска

Содержание ESPRIMO D5 Series

Отзывы:

Похожие инструкции для ESPRIMO D5 Series

Бренды по названию

Популярные бренды