4
Configure Switch Settings For SCSI Drives (MCM3xxxSS and MCJ3xxxSS):
3
Configure Jumper Settings For IDE Drives (MCM3xxxAP and MCJ3xxxAP):
CNH2 sets the SCSI ID and two drive functions
5
Device Driver Installation:
1. Turn on computer and close all applications.
2. Insert the DynaMO CD into your CD-ROM drive, and click on the CD-ROM icon.
3. Select the appropriate operating system folders for your operating system and click on
4. Follow the instructions to install your software.
5. Remove the CD and reboot the computer.
“README.txt” for installation instructions.
1. Jumper settings at factory shipping
: Short
CNH5
5-6 short-circuited: Sets the master device.
5 3 1
6 4 2
CNH5
2. Setting master device mode
Master device setting. Shows the setting for recognizing
the master device (device 0).
5 3 1
6 4 2
CNH5
CNH5
3. Setting slave device mode
Slave device setting. Shows the setting for recognizing
the slave device (device 1).
5 3 1
6 4 2
SCSI ID
Pin 5-6
Pin 3-4
Pin 1-2
0
Open
Open
Open
1
Open
Open
Short
2
Open
Short
Open
3
Open
Short
Short
4
Short
Open
Open
5
Short
Open
Short
6*
Short
Short
Open
7
Short
Short
Short
*Factory setting
Table 1
SCSI ID Setting (CNH2)
PIN #
Functions
Short
Open
7–8
SCSI Termination
Enabled* Disabled
9–10
Write Cache Mode
Enabled* Disabled
11–12
Spindle Automatic Stop Mode
Enabled
Disabled*
Table 2
Spindle Automatic Stop Mode (See Table 2)
Write Cache Mode (See Table 2)
SCSI Termination (See Table 2)
SCSI ID (See Table 1)
1
3
5
7
9
11 13 15
2
4
6
8
10 12 14 16
CNH2
