manualshive.com logo in svg

Fujitsu DL-3800, Руководство пользователя

Поделиться
Скачать
Fujitsu DL-3800 Скачать руководство пользователя страница 19

Introduction

1-1

INTRODUCTION

User's Manual

1

INTRODUCTION

Congratulations on purchasing this printer

.  This

printer is a compact, versatile printer that offers
maximum compatibility with today’s software
packages and personal computers.
The 24-wire print head provides crisp, clear printing for business,
office, and home environments.  This printer is also easy to install and
use.

Dot matrix printer

Key printer features and options are listed in the next two sections.

•

Software compatibility

.  This printer, which operates primarily

with the Fujitsu DPL24C PLUS command set, is compatible with
the IBM Proprinter XL24E command set and the Epson ESC/P2
command set.

•

Various character sets.  

As basic character sets, IBM PC character

sets 1 and 2 are available for the Fujitsu DPL24C PLUS command
set and the IBM Proprinter XL24E emulation, and the italic charac-
ter set and graphics character sets 1 and 2 are available for the
Epson ESC/P2 emulation.  As national character sets, a total of 57
or 61 national character sets (depending on the emulation), includ-
ing IBM PS/2 character sets, are available.

FEATURES

#01 Chapter 1

2000.09.20, 2:30 PM

1

Содержание DL-3800







































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды