Fujitsu DISK DRIVES MHL2300AT, Руководство по эксплуатации продукта

Страница: 114 / 232

5.3 Host Commands
C141-E104-03EN 5-37
Table 5.4 Information to be read by IDENTIFY DEVICE command (6 of 8)
Bit 5: '1' = Supports the Power-Up In Standby set.
Bit 4: '1' = Supports the Removable Media Status Notification feature
set.
Bit 3: '1' = Supports the Advanced Power Management feature set.
Bit 2: '1' = Supports the CFA (Compact Flash Association) feature set.
Bit 1: '1' = Supports the READ/WRITE DMA QUEUED command.
Bit 0: '1' = Supports the DOWNLOAD MICROCODE command.
*12 WORD 85
Bit 15: Undefined.
Bit 14: '1' = Enables the NOP command.
Bit 13: '1' = Enables the READ BUFFER command.
Bit 12: '1' = Enables the WRITE BUFFER command.
Bit 11: Undefined.
Bit 10: '1' = Enables the Host Protected Area function.
Bit 9: '1' = Enables the DEVICE RESET command.
Bit 8: '1' = Enables the SERVICE interrupt.
Bit 7: '1' = Enables the release interrupt.
Bit 6: '1' = Enables the read cache function.
Bit 5: '1' = Enables the write cache function.
Bit 4: '1' = Enables the P PACKET command set.
Bit 3: '1' = Enables the Power Management function.
Bit 2: '1' = Enables the Removable Media function.
Bit 1: '1' = Enables the Security Mode function.
Bit 0: '1' = Enables the SMART function.
*13 WORD 86
Bits 15-7: '1' = Reserved
Bit 6: Same definition as WORD 83.
Bit 5 Enables the Power-Up In Standby function.
Bit 4: '1' = Enables the Removable Media Status Notification function.
Bit 3: '1' = Enables the Advanced Power Management function.