background image

Comments

Suggestions

Corrections

The User Documentation Department would like to
know your opinion of this manual. Your feedback helps
us optimize our documentation to suit your individual 
needs.

Feel free to send us your comments by e-mail to 

[email protected]

.

Certified documentation 
according to DIN EN ISO 9001:2008

To ensure a consistently high quality standard and
user-friendliness, this documentation was created to
meet the regulations of a quality management system 
which complies with the requirements of the standard
DIN EN ISO 9001:2008. 

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Copyright and Trademarks

Copyright © 2012 Fujitsu Technology Solutions GmbH.

All rights reserved.
Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

The contents of this manual may be revised without prior notice.

Fujitsu assumes no liability for damages to third party copyrights or other rights arising from 
the use of any information in this manual.

No part of this manual may be reproduced in any form without the prior written permission 
of Fujitsu.

Microsoft, Windows, Windows Server, and Hyper V are trademarks or registered trademarks of 
Microsoft Corporation in the USA and other countries. 

Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries 
in the USA and other countries.

Содержание D3049





































Отзывы: