6 - English
Installing/removing main memory
Installing/removing main memory
Technical data
Technology
DDR3 800 / 1600 unbuffered DIMM modules 240-Pin; 1,5 V; 64 Bit,
no ECC
Total size
1 GB to 16 GB
Module size
1024, 2048 or 4096 MB per module
A current list of the memory modules recommended for this mainboard is available
on the Internet at:
"http://ts.fujitsu.com/mainboards"
At least one memory module must be installed. Memory modules with different
memory capacities can be combined.
You may use only unbuffered 1.5 V memory modules without ECC.
DDR3 memory modules must meet the PC3-6400U or PC3-8500U speci
fi
cation.
If you use more than one memory module, then make sure to distribute the
memory modules over both memory channels. By doing this you use the
performance advantages of the dual-channel mode.
Maximum system performance is achieved when identical memory modules
are used in Channel A and Channel B.
To simplify equipping, the slots are colour coded.
With a memory con
fi
guration of 16 GB, the visible and usable main memory may
be reduced to 15 GB (depending on the system con
fi
guration).
Channel B
slot 4
slot 2
Channel A
slot 3
slot 1
Number of memory modules inserted
Slot to be used
1
2
3
4
Channel A, slot 1
x
x
x
x
Channel B, Slot 2
x
x
x
Channel A, slot 3
x
x
Channel B, Slot 4
x
The installation/removal is described in the "Basic information on mainboard" manual.
24
Fujitsu Technology Solutions
Содержание D3011
