Fujitsu D2786, Техническое руководство

Страница: 30 / 40

30 Technical Manual
D2786 (RX200 S5)
Connectors and indicators Features
Clear CMOS - jumper JP2
Proceed as follows to delete the CMOS settings:
Ê
Create a backup of all the data.
Ê
Shut down the server.
Ê
Remove all power and connection cables.
Ê
Remove the housing cover.
Ê If necessary, remove the expansion card which hinders access to jumper
JP2 (Clear CMOS).
Ê Remove jumper JP2 from position 1-2 and insert it in position 2-3 for 20 to
30 seconds.
Ê Insert jumper JP2 in position 1-2 again.
Ê Reinsert the expansion card.
Ê
Close the server’s housing cover.
Ê
Connect all the power and connection cables again.
Ê
Switch the server on again.
Ê
During the POST process press [F2] in order to enter the Setup Utility.
Ê
Press [F9] to set the system defaults.
Ê
Press [F10] to save your changes and to exit the Setup Utility.
Jumper Pos. Description
1-2 Normal, not clear CMOS settings (default setting).
2-3 Clear CMOS settings and restore default values
(hardware).