D2530 (Econel 200 S2)
Technical Manual
21
Features
Connectors and jumpers
Settings with jumpers
The system board is supplied with all jumpers set on default position (pin 1-2).
KBPWR (1)
USBPW 1/2 (2) and USBPW 3/4 (15)
BIOSREC (19)
VGA_EN (22)
CLRTC (23)
7 = CPU2 fan
21 = LPT1
8 = RAID key
22 = VGA_EN (jumper)
9 = SATA 1 - 6
23 = CLRTC (jumper)
10 = USB 7/8
24 = LAN_EN (jumper)
11 = IDE primary
25 = LAN_BW (jumper)
12 = HDLED
26 = rear fan
13 = intrusion
27 = external connectors
14 = front panel
A = 5V Standby LED
1-2
PS/2 keyboard/mouse powered by 5V (default)
2-3
PS/2 keyboard/mouse powered by 5V Standby
1-2
USB device powered by 5V (default)
2-3
USB device powered by 5V Standby
1-2
system BIOS (default)
2-3
recover system BIOS (Flash BIOS, Recovery Diskette required)
1-2
onboard VGA enabled (default)
2-3
onboard VGA disabled (PCI VGA graphics controller)
1-2
CMOS/RTC settings are not cleared (default)
2-3
clear CMOS/RTC settings
