Cremson Starterkit User Manual
Chapter 7 . Appendix
7.2 Tool options for own projects
Valid load module files for different CPU boards can only be achieved if the language tool
configuration is appropriate. The most convenient way to create own projects is to copy the
provided Template-Projects from the sample-directory and use it as “blank sheet”.
Always check the Linker Settings (“Project – Setup Project – Linker – Disposition”) to make
sure the following memory map is applied according to your project configuration :
Recommended linker settings for MB91F369 CPU-Board for debugging
Memory Type
Used for
Area(s)
Sections
Data RAM,
F-Bus RAM
Variables,Stack,
Displaylist
3D000..3FFFF
40000..43FFF
DATA, INIT, STACK,
(DISPLIST) = RAM_AREA
External Debug RAM
Code
88:0000.. 8F:3FFF CODE = CODE_AREA
External Debug RAM
Boot-Code
8F:4000..8F:FFFF
START,INIT,CONST
=ROM_AREA
Note : Startup code must be located at 0x8F:4000 !
Table 3: Linker Settings for MB91F369 Debug-Configuration
Recommended linker settings for MB91F369 CPU-Board for embedded flash execution
Memory Type
Used for
Area(s)
Sections
Data RAM,
F-Bus RAM
Variables,Stack,
Displaylist
3D000..3FFFF
40000..43FFF
DATA, INIT, STACK,
(DISPLIST) = RAM_AREA
Internal flash ROM
Code
08:0000.. 0F:3FFF CODE = CODE_AREA
Internal flash ROM
Boot-Code
0F:4000..0F:FFFF
START,INIT,CONST
=ROM_AREA
Note : Startup code must be located at 0x0F:4000 !
Table 4: Linker Settings for MB91F369 Flash-Configuration
Recommended linker settings for MB91F362 CPU-Board (embedded flash only)
Memory Type
Used for
Area(s)
Sections
Data RAM,
F-Bus RAM
Variables,Stack,
Displaylist
3D000..3FFFF
40000..40FFF
DATA, INIT, STACK,
(DISPLIST) = RAM_AREA
Internal flash ROM
Code
08:0000.. 0F:3FFF CODE = CODE_AREA
Internal flash ROM
Boot-Code
0F:4000..0F:FFFF
START,INIT,CONST
=ROM_AREA
Note : Startup code must be located at 0x0F:4000 !
Table 5: Linker Settings for MB91F369 Debug-Configuration
- 28 -
© Fujitsu Microelectronics Europe GmbH
