En-6
OPERATING MANUAL
Remote controller custom code setting
When two or more air conditioners are installed in a room and the
remote controller is operating an air conditioner other than the one you
wish to set, change the custom code of the remote controller to operate
only the air conditioner you wish to set (4 selections possible).
When two or more air conditioners are installed in a room, please
contact your retailer to set the individual air conditioner custom codes.
Use the following steps to select the custom
code of the remote controller.
(Note that the air conditioner cannot receive
a signal if the air conditioner has not been set
for the matching custom code.)
the clock is displayed on the remote
controller display.
seconds to display the current custom code (initially set to A).
3. Press the SET TEMP. ( / ) button to change the custom code
Match the code on the display to the air conditioner custom code.
4. Press the MODE button again to return to the clock display. The
custom code will be changed.
• If no buttons are pressed within 30 seconds after the custom code
is displayed, the system returns to the original clock display. In this
• The air conditioner custom code is set to A prior to shipment.
Contact our authorized service personnel to change the custom code.
• Depending on the remote controller, the custom code may return to
custom code A when the batteries are replaced. In this case, if you
use a code other than A, reset the code after replacing the batter
ies. If you do not know the air conditioner custom code setting, try
air conditioner.
Wired Remote Controller (Option)
The optional wired remote controller can be used.
compared with using wireless remote controller.
[The additional functions for wired remote controller]
• Temperature set back timer
And, you can use wired and wireless remote controller together.
However, you must change some restricted functions of wireless remote
controller to invalid.
If restricted function is valid, remote controller cannot use correctly.
(beeping sound will be heard, OPERATION, TIMER and the ECONOMY
[The restricted functions for wireless remote controller]
• Outdoor unit low noise
• Energy saving
• Powerful
• Timer operation
Timer Operation
ON timer or OFF timer
You can set the ON timer or OFF timer with the following steps.
1
Press the "TIMER SETTING" button to start the setting.
2
Press the "SELECT" button to choose the desired mode. The
WEEKLY
ON/OFF
(ON)
ON/OFF
(OFF)
ON/OFF
(ON
OFF)
SLEEP
(OFF)
3
* To cancel timer setting during the setting process, press the
"TIMER SETTING" button again.
4
Adjust the time by pressing the "SELECT" button while the clock
indicator is blinking. Each time you press the button, the time will
5
Press the "SEND" button.
To cancel the ON/OFF timer, press the "ON/OFF" button while the ON/
OFF indicator is on. (Erases the indicator)
Program timer (combined use of the ON timer and the OFF timer)
Timer
Indicator on remote controller display
To set the program timer, conduct the same steps ~ for the ON/
OFF timer. (Select ON OFF in Step 2)
Notes:
• If you change the setting value for the timer after the program timer
is set, the counting down of the timer will be reset at that moment.
• Time setting for each combination should be within a span of 24 hours.
SLEEP timer
~ for the ON/OFF timer.
4
Adjust the time by pressing the "SELECT" button while the clock
indicator is blinking.
hours
(30 min.)
5
Press the "SEND" button.
To cancel the SLEEP timer, press the "SLEEP" button while the
SLEEP indicator is on. (Erases the indicator)
To help you to fall asleep comfortably and prevent excessive warming
or cooling in sleep, the SLEEP timer controls the temperature setting
automatically in accordance with the set time shown as follows. The
In HEAT mode
Set
temperature
Set time
Set time
30 min.
In COOL or DRY mode
(continued)
Note for timer settings:
of a circuit breaker, makes the set internal clock go wrong.
In such a case, the TIMER indicator on the indoor unit blinks, and
you need to readjust the setting.
