En-3
AIR CONDITIONER Wall Mounted Type
OPERATING MANUAL
1 Intake
grille
Before starting operation, make sure that the intake grille has been
shut completely. Incomplete closing may have an effect on the proper
function or performance of the product.
2
MANUAL AUTO button
Use when the remote controller is lost or there is a malfunction.
Status
Action
Mode or operation
In operation
Press more than 3 seconds.
Stop
Stopping
Press more than 3 seconds and
less than 10 seconds.
AUTO
Press more than 10 seconds.
(Only for servicing.*)
Forced cooling
After cleaning
Press less than 3 seconds.
Filter indicator reset
*:To stop forced cooling, press this button or START/STOP button on
the remote controller.
3 Front
panel
See page 8
4 Human
Sensor
Used for Energy Saving Program. Controls temperature setting by
detecting people in the room.
5 Vertical
air
À
ow direction louver
Each time you press Vertical SET button on the remote controller, the
angle of the vertical air
À
ow direction louver moves as follows:
1
2
3
4
5
6 7 8
COOL, DRY or FAN
mode**
FAN mode
1
2
3
7
6
5
*
4
8
*: Default setting in each mode.
**: Suggested setting range
• Do not adjust by hand.
• At the beginning of AUTO mode, they may stay on position 1 for a
while for adjustment.
• If the angle is set to position 5-8 for more than 30 minutes in COOL
or DRY mode, the louver will automatically return to position 4.
• Keeping the position 5-8 during COOL or DRY mode may cause
condensation to form, and the drops may damage your property.
6 Power
diffuser
In conjunction with movement of the vertical air
À
ow direction louver,
the angle of the power diffuser moves as follows:
Vertical air
À
ow
direction louver
Power diffuser
3
7
6
5
4
2
1
8
• In SWING operation, power diffuser does not move.
7 Horizontal
air
À
ow direction louver
Each time you press the Horizontal SET button on the remote controller,
the air
À
ow direction range of the horizontal air
À
ow direction louver will
change as follows:
1
2
3
4
5
Horizontal air
À
ow direction louver
5
4
1
3
*
2
*: Default setting.
8 Drain
hose
9
Remote controller signal receiver
CAUTION
For appropriate signal transmission between remote controller and
indoor unit, keep the signal receiver away from the following items:
- Direct sunlight or other strong lights
- Flat-panel television screen
In rooms with instantaneous
À
uorescent lights, such as in-
verter type ones, the signal may not be transmitted properly. In
such a case, consult the store of purchase.
1
14
13
11
12
8
3
4
2
7
5
6
10
9
10 ECONOMY indicator (green)
Lights in ECONOMY operation.
11 TIMER indicator (orange)
Lights in TIMER operation, and blinks slowly when the timer setting
error is detected.
For details, refer to “Auto-restart function” on page 9.
12 OPERATION indicator (green)
Lights in normal operation, and blinks during Demand Response
operation. For details, refer to page 8.
See page 10
13 Air
¿
lter
See page 11
14 Air cleaning
¿
lters
Purify or deodorize the air, and provide fresh air
À
ow.
Indoor Unit Overview and Operations
9320455019_OM_EN.indd 3
9320455019_OM_EN.indd 3
8/12/2013 8:58:46 AM
8/12/2013 8:58:46 AM
