Remote switch setting
•
Remote controller address setting (SW3)
This switch can be used when group control system. Set the remote controller address in the
1,2,-,15 order.
SW3
SW state
Factory setting
0
Single
♦
1—15
Remote controller address
Jumper wire setting
•
JM1 and JM2 setting prohibited
•
Fan delay setting (JM3)
When the indoor unit is stopped while operating in conjunction with auxiliary heater, the indoor
unit fan operation will continue for one minute.
JM3
JM state
Factory setting
Connect
Disable
♦
Disconnect
Enable
- 25 -
9-1. Models: ARXG45KHTA and ARXG54KHTA
9. Function settings
DUCT TYPE
ARXG45, 54KHTA
DUCT TYPE
ARXG45, 54KHTA