background image

En-9

ADJUSTING THE DIRECTION OF AIR CIRCULATION

Vertical (up-down) direction of airflow is adjusted by pressing the Remote Control Unit’s SET button. Horizontal (right-left)
airflow direction is adjusted manually, by moving the Air Flow Direction Louvers.
Whenever making horizontal airflow adjustments, start air conditioner operation and be sure that the vertical air direction
louvers are stopped.

 

R

 

DANGER!

Never place fingers or foreign objects in-
side the outlet ports, since the internal fan
operates at high speed and could cause
personal injury.

Always use the Remote Control Unit’s

SET button to adjust the vertical airflow
louvers. Attempting to move them

manually could result in improper op-
eration; in this case, stop operation and

restart. The louvers should begin to
operate properly again.

During use of the Cooling and Dry
modes, do not set the Air Flow Direc-

tion Louvers in the range 

4

 - 

7

 for

long periods of time, since water vapor

may condense near the outlet louvers
and drops of water may drip from the

air conditioner. During the Cooling and
Dry modes, if the Air Flow Direction
Louvers are left in the range 

4

 - 

7

 for

more than 30 minutes, they will auto-
matically return to position 

3

.

When used in a room with infants, chil-

dren, elderly or sick persons, the air
direction and room temperature

should be considered carefully when
making settings.

Vertical Air Direction Adjustment

Press the SET button (Fig. 6 

R

).

Each time the button is pressed, the air direction range will change as follows:

1

 

 

2

 

 

3

 

 

4

 

 

5

 

 

6

 

7

Types of Air flow Direction Setting:

1

,

2

,

3

:

During Cooling/Dry modes

1

,

2

,

3

,

4

,

5

,

6

,

7

: During FAN mode

The Remote Control Unit’s display does
not change.

Use the air direction adjustments within the ranges shown above.

The vertical airflow direction is set automatically as shown, in accordance with
the type of operation selected.

During Cooling/Dry/FAN mode : Horizontal flow 

1

During AUTO mode operation, for the first minute after beginning operation,
airflow will be horizontal 

1

; the air direction cannot be adjusted during this pe-

riod.

Right-Left Adjustment

Adjust the Right-Left louvers.

Move the Right-Left louvers to adjust air flow in the direction you prefer.

R

 

DANGER!

When adjusting the Right-Left Louvers, it
is necessary to stop the Air-Conditioner
first and make sure that it stops completely
before adjusting the direction.

knob(three places)

Right-Left Louvers

1

2

3

4
5
6
7

knob

05M150_9315255020-01_En

2005.12.15, 10:56

9

Содержание AOU18CL




















Отзывы: