10
ADJUSTING THE DIRECTION OF AIR CIRCULATION
●
Adjust the up, down, left, and right AIR directions with the AIR DIRECTION buttons on the Remote Control Unit.
●
Use the AIR DIRECTION buttons after the Indoor Unit has started operating and the airflow-direction louvers have
stopped moving.
R
DANGER!
●
Never place fingers or foreign objects in-
side the outlet ports, since the internal fan
operates at high speed and could cause
personal injury.
●
Always use the Remote Control Unit’s
SET button to adjust the vertical airflow
louvers. Attempting to move them
manually could result in improper op-
eration; in this case, stop operation and
restart. The louvers should begin to
operate properly again.
●
During Cooling and Dry modes, do not
move the vertical air direction louvers
outside their proper operating range
for the mode (
1
-
3
) and into the fan
region (
4
-
6
); using the louvers in
the fan region will cause moisture to
condense near the air outlet, and wa-
ter may drop onto the floor. During the
Cooling/Dry modes, if the louvers are
operated outside the range
1
-
3
for
more than 20 minutes, they will be
automatically returned to the
3
range.
●
When used in a room with infants, chil-
dren, elderly or sick persons, the air
direction and room temperature
should be considered carefully when
making settings.
Vertical Air Direction Adjustment
Press the SET button (Vertical) (Fig. 6
R
).
Each time the button is pressed, the air direction range will change as follows:
1
2
3
4
5
6
Types of Air flow Direction Setting:
1
,
2
,
3
:
During Cooling/Dry modes
1
,
2
,
3
,
4
,
5
,
6
:
During Fan mode
The Remote Control Unit’s display does
not change.
●
Use the air direction adjustments within the ranges shown above.
●
The vertical airflow direction is set automatically as shown, in accordance with
the type of operation selected.
During Cooling/Dry/Fan mode : Horizontal flow
1
●
During AUTO mode operation, for the first minute after beginning operation,
airflow will be horizontal
1
; the air direction cannot be adjusted during this pe-
riod.
●
Direction
1 2
Only the direction of the Air Flow Direction Louver changes; the direction of the
Power Diffuser does not change.
1
2
3
4
5
6
Horizontal Air Direction Adjustment
Press the SET button (Horizontal)(Fig. 6
S
).
●
Each time the button is pressed, the air direction range will change as follows:
1
2
3
4
5
1
2
3
4
5
The remote control unit’s
display does not change.
07H093_9315345141-01_En_body
2007.08.21, 16:05
10
