15
OPERATING TIPS
●
Should the power supply to the air conditioner be inter-
rupted by a power failure, the air conditioner will restart
automatically in the previously selected mode once the
power is restored.
●
Should a power failure occur during TIMER operation,
the timer will be reset and the unit will begin (or stop)
operating under the new timer setting. In this event, the
TIMER indicator lamp (green) will flash (see page 4).
●
Use of other electrical appliances (electric shaver, etc.) or
nearby use of a wireless radio transmitter may cause the
air conditioner to malfunction. In this event, temporarily
disconnect the power supply, reconnect it, and then use
the remote control unit to resume operation.
AUTO Restart
In Event of Power Interruption
Dry Mode
About 0 to 43 °C
About 18 to 32 °C
About 80 % or less
If the unit is used for long peri-
ods under high-humidity condi-
tions, condensation may form
on the surface of the indoor
unit, and drip onto the floor or
other objects underneath.
Outdoor temperature
Indoor temperature
Indoor humidity
Cooling Mode
About 0 to 43 °C
About 18 to 32 °C
About 80 % or less
If the unit is used for long peri-
ods under high-humidity condi-
tions, condensation may form
on the surface of the indoor
unit, and drip onto the floor or
other objects underneath.
Heating Mode
About –10 to 21 °C
About 30 °C or less
—
Temperature and Humidity Range
●
If the air conditioner is used under higher temperature conditions than those listed, the built-in protection circuit may
operate to prevent internal circuit damage. Also, during Cooling and Dry modes, if the unit is used under conditions of
lower temperature than those listed above, the heat-exchanger may freeze, leading to water leakage and other damage.
●
Do not use this unit for any purposes other than the Cooling, (Heating), Dehumidifying, and air-circulation of rooms in
ordinary dwellings.
