4
Fig. 6 Remote Control Unit
H
SLEEP button
I
MASTER CONTROL button
J
SET TEMP./SET TIME buttons (
)
K
Signal Transmitter
L
TIMER button
M
FAN CONTROL button
N
START/STOP button
O
AIR FLOW DIRECTION
VERTICAL SET button
P
AIR FLOW DIRECTION
VERTICAL SWING button
Q
AIR FLOW DIRECTION
HORIZONTAL SET button
R
AIR FLOW DIRECTION
HORIZONTAL SWING button
S
TIME ADJUST button
T
ACL button
Rear side (Fig. 7)
U
TEST RUN
●
Touch the two metal contacts with a me-
tallic object to send the signal to perform
a test run.
●
Perform a test run only when installing the
air conditioner. If the signal to perform a
test run is received during normal opera-
tion, the air conditioner’s thermostat will
malfunction.
●
If the signal to perform a test run is re-
ceived during normal operation, the unit
will switch to the test operation mode and
the indoor unit’s OPERATION and TIMER
indicator lamps will flash simultaneously.
●
To stop the test operation mode, press the
START/STOP button to stop the air condi-
tioner.
V
Remote Control Unit Display (Fig. 8)
W
Transmit Indicator
X
Clock Display
Y
Operating Mode Display
Z
T imer Mode Display
[
Fan Speed Display
\
Temperature Set Display
]
T imer Set Indicator
`
Temperature Set Indicator
Fig. 1 Indoor Unit
1
Operating Control Panel (Fig. 2)
2
MANUAL AUTO button
3
Indicator Panel (Fig. 3)
4
Remote Control Signal Receiver
5
OPERATION Indicator Lamp (red)
6
TIMER Indicator Lamp (green)
7
SWING Indicator Lamp (orange)
(VERTICAL SWING)
8
SWING Indicator Lamp (orange)
(HORIZONTAL SWING)
●
If the TIMER indicator lamp flashes when
the timer is operating, it indicates that a
fault has occurred with the timer setting
(See page 16 Auto Restart).
9
Intake Grille (Fig. 4)
;
UP/DOWN Air Direction Flaps
A
Moving Diffuser
B
RIGHT/LEFT Air Direction Louvers
(behind UP/DOWN Air Direction Flaps)
C
Drain Hose
D
Air Filter
Fig. 5 Outdoor Unit
The size of the outdoor unit varies according to
the model.
E
Intake Port
F
Outlet Port
G
Pipe Unit
