background image

– 65 –

ADJUSTING  THE  DIRECTION  OF  AIR  CIRCULATION

Vertical Air Direction Adjustment

Press the AIR FLOW DIRECTION button
(Fig.6

@7

).

Each time the button is pressed, the air direction
range will change as follows:

Vertical (up-down) direction of airflow is adjusted by
pressing the Remote Control Unit's AIR FLOW
DIRECTION button.

Horizontal (right-left) airflow direction is adjusted
manually, by moving the Air Flow Direction Louvers.

Whenever making horizontal airflow adjustments,
start air conditioner operation and be sure that the
vertical air direction louvers are stopped.

q

w

e

Cooling/
Dry mode

Heating
mode

Fan mode

r

t

y

u

e

w

q

u

y

t

r

• Use the air direction adjustments within the

ranges shown above.

• The vertical airflow direction is set automatically

as shown, in accordance with  the type of opera-
tion selected.

During Cooling/Dry mode : Horizontal flow 

q

During Heating mode :

Downward flow 

y

• During Auto Changeover operation, the position

of the air flow direction louvers will change auto-
matically in accordance with the selected mode.

• If you wish to select a different airflow direction,

you may use the remote control unit's AIR FLOW
DIRECTION button to choose a different setting.

• When the temperature of the air being blown out

is low at the start of heating operation or during
defrosting, the airflow direction temporarily
becomes

u

to prevent cold air being blown onto

the body.

• When the AIR FLOW DIRECTION button of the

remote control unit is pressed, some time is
required until the airflow direction  louvers reach
the desired position.

During this time, adjustment of the airflow direction

is not possible even when the AIR FLOW
DIRECTION button is pressed. 

• During Monitor operation in AUTO CHANGEOVER

mode, the airflow direction automatically becomes

q

, and it can not be adjusted.

• Always use the remote control unit's AIR FLOW

DIRECTION button to adjust the vertical airflow
louvers. Attempting to move them manually
could result in improper operation; in this case,
stop operation and restart. The louvers should
begin to operate properly again.

• When used in a room with infants, children,

elderly or sick persons, the air direction and room
temperature should be considered carefully
when making settings.

• Always use the remote control unit's AIR

FLOW DIRECTION button to adjust the vertical
airflow louvers. Attempting to move them man-
ually could result in improper operation; in this
case, stop operation and restart. The louvers
should begin to operate properly again.

• When used in a room with infants, children,

elderly or sick persons, the air direction and
room temperature should be considered care-
fully when making settings.

Right-Left Adjustment

Adjust the Right-Left Louvers

• Move the Right-Left Louvers to adjust air flow in

the direction you prefer.

• Never place fingers or foreign objects inside the

outlet ports, since the internal fan operates at
high speed and could cause personal injury.

Right-Left Louvers

Knob

Содержание AOT13PNA




















Отзывы: