9
ADJUSTING THE DIRECTION OF AIR CIRCULATION
Vertical (up-down) direction of airflow is adjusted by pressing the Remote Control Unit’s AIR FLOW DIRECTION button. Hori-
zontal (right-left) airflow direction is adjusted manually, by moving the Air Flow Direction Louvers.
Whenever making horizontal airflow adjustments, start air conditioner operation and be sure that the vertical air direction
louvers and the power diffuser (Fig. 1
C
) are stopped.
DANGER!
●
Never place fingers or foreign objects in-
side the outlet ports, since the internal fan
operates at high speed and could cause
personal injury.
●
Always use the remote control unit’s
AIR FLOW DIRECTION button to adjust
the vertical airflow louvers. Attempting
to move them manually could result in
improper operation; in this case, stop
operation and restart. The louvers
should begin to operate properly again.
●
During use of the Cooling and Dry
modes, do not set the Air Flow Direc-
tion Louvers in the Heating range (
5
-
7
) for long periods of time, since wa-
ter vapor may condense near the out-
let louvers and drops of water may drip
from the air conditioner. During the
Cooling and Dry modes, if the Air Flow
Direction Louvers are left in the heat-
ing range for more than 30 minutes,
they will automatically return to posi-
tion
4
.
●
When used in a room with infants, chil-
dren, elderly or sick persons, the air
direction and room temperature
should be considered carefully when
making settings.
Vertical Air Direction Adjustment
Press the AIR FLOW DIRECTION button (Fig. 6
S
).
Each time the button is pressed, the air direction range will change as follows:
1
2
3
4
5
6
7
Types of Air flow Direction Setting:
1
,
2
,
3
,
4
:
During Cooling/Dry modes
5
,
6
,
7
:
During Heating mode
The remote Control Unit’s display does
not change.
●
Use the air direction adjustments within the ranges shown above.
●
The vertical airflow direction is set automatically as shown, in accordance with
the type of operation selected.
During Cooling/Dry mode : Horizontal flow
1
During Heating mode
: Downward flow
7
●
During AUTO mode operation, for the first minute after beginning operation,
airflow will be horizontal
1
; the air direction cannot be adjusted during this pe-
riod.
●
When the air flow is directed downwards (
7
) at the time of heating operation,
the Power Diffuser opens automatically and generates a powerful air flow to
warm your feet quickly and efficiently.
Right-Left Adjustment
Adjust the Right-Left louvers.
●
Move the Right-Left louvers to adjust air flow in the direction you prefer.
Right-Left Louvers
knob
●
Always operate the Air Flow Direction
Louvers and the Power Diffuser with
the air flow direction buttons on the
remote control. Forcible movement by
hand can cause incorrect operation. In
such a case, stop the operation to let
the unit return to normal condition.
●
Do not set the Air Flow Direction
Louvers and the Power Diffuser for a
long time to the heating mode (
7
)
during cooling or drying operation.
This can cause condensation at the dis-
charge opening and dripping of water.
(When operation is continued for 30
minutes or more in the heating mode
5 6 7
, automatic return will be made
to the direction
4
.)
Power Diffuser
(for warm air to your feet)
