Getting started
Removing monitor base
Before you can use a swivel arm or a wall bracket, you must remove the monitor base.
The display surface is susceptible to scratching!
1
1
►
Switch off the monitor and pull the power
plug out of the power socket.
►
Lay the monitor on its face on a soft surface.
►
Remove the cover and disconnect all cables.
►
Remove the screws (1) on the rear
of the monitor.
You can now mount a swivel arm or
a wall bracket as per VESA FPMPMI
with 100 mm hole spacing.
For instructions on how to mount the swivel arm or wall bracket, please see
the documentation for the swivel arm or wall bracket.
Connecting the device
Please observe the safety information in
"Important notes", Page 3
.
CE conformance and optimum picture quality are guaranteed only if
you use the data cables supplied.
►
Switch off the monitor and the computer.
►
Disconnect the power plug from the computer.
A26361-K1300-Z120-1-7619, edition 2
11
Содержание AMILO LXL 3220W
Страница 1: ...Consumer Monitor English Operating Manual AMILO LXL 3220W ...
Страница 3: ......
Страница 8: ...Contents HDMI port 30 A26361 K1300 Z120 1 7619 edition 2 ...