En-17
2-2-2.
Individual Setting
3
4
5
6
7
8
9
No.
Item
Description
“Group name” / “R.C.G. name”
Selects “Group name” to be set.
For Batch setting, “All Indoor Units” is displayed.
“Special State”
When the currently displayed group or R.C.G. is in a special state, icon is
displayed.
• Displayed states when even one unit is in a special state
Icon
State
Icon
State
Emergency stop
Mismatch mode
Maintenance mode
Test operation
Refrigerant leakage
Pump down
Error
Auxiliary power supply
Oil recovery
―
―
• Displayed state when all units are in a special state
Managed unit (when all indoor units are not master indoor unit, and
master unit is managed or outdoor unit is managed)
3
“Room Temp.”
Displays the room temperature.
4
“On/Off”
Selects “On” or “Off” for operation state.
5
“Mode”
Selects the mode. (“Auto”, “Cool”, “Dry”, “Fan” and “Heat”. Selectable
mode depends on the indoor unit)
6
“Set Temp.”
Selects the “Set Temp.” with 0.5ºC (1ºF) in units. (except when “Fan” or
“Off” is selected)
7
“Set Temp. (Custom Auto)” “Cool”*
Setting range: “Auto” 18 to 30ºC (64 to 88ºF)
“Cool / Dry” 18 to 30ºC (64 to 88ºF)
“Heat” 10 to 30ºC (44 to 88ºF)
8
“Set Temp. (Custom Auto)” “Heat”*
9
“Fan Speed”
Sets “Fan Speed”.
“Auto”, “High”, “Med-High”, “Med”, “Med-Low”, “Low”, “Quiet”
“Air Flow Direction”
Sets “Air Flow Direction”. →
“Anti Freeze”
Sets “Anti Freeze” operation. Select “On” or “Off”.
“Economy”
Sets “Economy” operation. Select “On” or “Off”.
“Temperature Limit”
.
“Filter Sign”
Resets “Filter Sign”. (Operation accumulated time is reset.)
“R.C. Prohibition”
.
Group / R.C.G. switch-over button
Switches over between group display and R.C.G. display.
* “Set temp.” is displayed only when a unit with Custom Auto function is registered.
Custom Auto:
Set the set temperature for cooling and the set temperature for heating separately. During the Custom Auto mode
operation, when the room temperature exceeds the set temperature for cooling, the cooling operation is performed, and
when the room temperature falls below the set temperature for heating, the heating operation is performed. (It can be
used only when the setting of the indoor unit compatible with this function is valid.)
Note
Содержание Airstage UTY-DCGGZ1
Страница 48: ......