En-4
3. Replace the Intake Grille.
(1) Hook the ropes.
(2) Set the left and right mounting shafts into the bearings at the bottom
of the panel.
(3) Press the place where the mark on the diagram indicates and close
the intake grille.
Intake
Grille
3
2
1
2
1
3
Rope
Cleaning the Air Filter
1. Open the Intake Grille, and remove the air
fi
lter.
Push down the air
fi
lter’s handle, disconnect
the 2 upper tabs, and pull out.
2. Remove dust with a vacuum cleaner or by washing.
After washing, allow to dry thoroughly in a shaded place.
3. Replace the Air Filter and close the Intake Grille.
(1) Align the sides of the air
fi
lter with the panel, and push in fully, making
sure the 2 upper tabs are returned properly to their holes in the panel.
PANEL
AIR FILTER
PANEL
AIR FILTER
(2) Close the Intake Grille.
●
Dust can be cleaned from the air
fi
lter either with a vacuum cleaner,
or by washing the
fi
lter in a solution of mild detergent and warm water.
If you wash the
fi
lter, be sure to allow it to dry thoroughly in a shady
place before reinstalling.
●
If dirt is allowed to accumulate on the air
fi
lter, air
fl
ow will be reduced,
lowering operating ef
fi
ciency and increasing noise.
●
During periods of normal use, the Air Filters should be cleaned every
two weeks.
●
When used for extended periods, the unit may accumulate dirt
inside, reducing its performance. We recommend that the unit be
inspected regularly, in addition to your own cleaning and care. For
more information, consult authorized service personnel.
●
When shutting down the unit for one month or more,
fi
rst allow the
fan mode to operate continuously for about one-half day to allow
internal parts to dry thoroughly.
Air cleaning
fi
lter installation
1. Open the Intake Grille and remove the Air
fi
lters.
2. Install the Air cleaning
fi
lter set (set of 2).
Set the air cleaning
fi
lter into the panel.
Catch it on 5 places of picks.
(3 places of upper parts and lower part 2 places.)
Air cleaning
fi
lter
3. Install the two Air
fi
lters and close the Intake Grille.
●
When air cleaning
fi
lters are used, the effect will increased by setting
the fan speed to “High”.
Replacing dirty air cleaning
fi
lters
Replace
fi
lters with the following components (purchased separately).
●
APPLE-CATECHIN FILTER: UTR-FC03-2
●
ION DEODORIZATION FILTER: UTR-FC03-3
1. Open the Intake Grille and remove the Air
fi
lters.
2. Replace them by two new Air cleaning
fi
lters.
(1) Remove the old air cleaning
fi
lters in reverse order of their installation.
(2) Install in the same way as for installation of the air cleaning
fi
lter set.
9382567033-01.indb 4
9382567033-01.indb 4
11/21/2017 3:38:40 PM
11/21/2017 3:38:40 PM
