Downloaded from Projector.com
XP60
Projector
14 - English
A26361-K865-Z100-1-5E19
Correcting trapezoid distortion
With the and buttons you can correct for keystone distortion within certain limits. Keystoning
occurs if the projector is not positioned at a right angle to the projection screen but projects from a
higher or lower position. This function is also accessible via the OSD menu (see "Changing the OSD
settings").
Ê
Press and hold the or button until the projected picture no longer looks distorted.
Other settings
During operation you can
•
adjust the volume with the "Volume" button on the projector's operator panel or on the remote
control
•
switch between the signal sources with the "Source/Select" button on the projector's operator
panel or with the "Computer" and "Video" buttons on the remote control
Changing the OSD settings
You can use the buttons on the control panels of the projector and the remote control to set the
functions via an integrated OSD menu (On-Screen-Display).
i
The OSD menu is available in eight languages (default setting: English). How to change
the language for the OSD menu is described in the section "Language menu". Most of the
examples show the English OSD menu.
Operating the OSD menu with the projector’s OSD menu
Activating the OSD menu
Ê
Press the "Menu" button on the projector.
The basic menu is displayed.
Marking a function or submenu
Ê
Use the arrow buttons to move the cursor to the desired function or submenu.
Selecting a function or submenu
Ê
Press the "Source/Select" button.
The submenu opens, or you can make the desired settings.
Setting a function
Ê
Press the or buttons until the setting is correct.
If the function can only be activated or deactivated:
Ê
Select the desired function and activate it by pressing the "Source/Select" button.
