Fujitsu Siemens Computers SCENICVIEW P996-1, Руководство по эксплуатации

Страница: 21 / 31

Colour Monitor SCENICVIEW P996-1
A26361-K967-Z100-1-5E19,
Edition
1
English - 13
The functions of the selected topic are shown on the right in the OSD menu.
► Mark the function for which you want to change the settings with the buttons
6
or
5
.
► Press the Menu button to select the highlighted function.
You can now change the value of the selected function.
► Set the value of the selected function with the buttons
3
and
4
.
► Press the Exit button to exit the function again.
The set value is applied.
► Mark the next function for which you want to change the setting with the buttons
6
or
5
. To
select a different topic, press the Exit button. Change the setting of the desired function as
described above.
All modifications are automatically stored if no button is pressed for several seconds. The OSD
menu disappears after approx. 15 seconds.
► To exit the OSD menu immediately, press the Exit button again.
All setting options for the individual functions are described in the following.
The menus
This menu contains the following functions:
● Adjusting the brightness
● Adjusting the contrast
● Set or deactivate moiré reduction
● Degaussing the screen
● Activating the factory settings
Adjusting the contrast
With this function you set the contrast between the foreground and the background of the
picture.
i
You will increase the life of your screen if you adjust the contrast and brightness to
medium.
Adjusting the brightness
With this function you set the brightness of the picture.
Downloaded from ManualMonitor.com Manuals