28
Technical Manual
D2300
(RX200
S3)
Interfaces and Connectors
Features
LAN ports
On this system board you will find one Broadcom NetXtreme BMC5715C
Gigabit Ethernet Controller (two channel). This LAN controller supports the
transfer rates of 10 Mbit/s, 100 Mbit/s and 1 Gbit/s. The LAN controller supports
WOL function through Magic Packet™.
FIt is also possible to boot a device without its own boot hard disk via LAN. Here
Intel PXE is supported.
The LAN port serves as management interface (iRMC Port) and is prepared for
RemoteView.
The LAN controller connectors are equipped with two LEDs (light emitting
diode) indicating the transfer rate and the activity:
Figure 6: LAN port
1
LAN transfer rate green + yellow off
transfer rate 10 Mbit/s (or no
connection)
green
on
transfer rate 100 Mbit/s
yellow
on
transfer rate 1000 Mbit/s
2
LAN-Link/activity green
on
LAN connection
off
no LAN connection
flashing LAN transfer
1
2
