Fujitsu Siemens Computers D1711, Техническое руководство

Страница: 52 / 60

2 BIOS information
44
A26361-D1711-Z120-1-7619, Edition
1
Restore on AC Power Loss [Last State]
When set to Power Off, the system goes into off state after an AC power loss. When set to Power
On, the system goes on after an AC power loss. When set to Last State, the system goes into either
off or on state whatever was the system state before the AC power loss.
Configuration options: [Last State] [Power Off] [Power On]
Suspend Time Out [Disabled]
Allows you to select the specified time at which the system goes on suspend mode.
Configuration options: [Disabled] [1 Minute] [2 Minutes] [4 Minutes] [8 Minutes] [10 Minutes]
[20 Minutes] [30 Minutes] [40 Minutes] [50 Minutes] [60 Minutes]
Power On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this item is set to Enabled,
the items RTC Alarm Date, RTC Alarm Hour, RTC Alarm Minute, and RTC Alarm Second appear
with set values.
Configuration options: [Disabled] [Enabled]
Power On External Modems [Disabled]
Allows either settings of [Enabled] or [Disabled] for powering up the computer when the external
modem receives a call while the computer is in Soft-off mode.
Configuration options: [Disabled] [Enabled]
i
The computer cannot receive or transmit data until the computer and applications are fully
running. Thus, connection cannot be made on the first try.
Turning an external modem off and then back on while the computer is off causes an
initialization string that turns the system power on.
Power On PCI Device [Enabled]
When set to [Enabled], this parameter allows you to turn on the system through a PCI LAN or
modem card. This feature requires an ATX power supply that provides at least 1 A on the +5 VSB
lead.
Configuration options: [Enabled] [Disabled]
Power On PS/2 KeyBoard [Disabled]
Allows you to use specific keys on the keyboard to turn on the system. When set to [S5], the item
Wake-up Key is enabled. This feature requires an ATX power supply that provides at least 1 A on
the +5V SB lead.
Configuration options: [Disabled] [Enabled]