Fujitsu Siemens Computers D1501, Техническое руководство, Страница: 16 / 32

Features
8 - English
A26361-D1501-Z120-2-7419
Voltage monitoring:
The operating vo5 V, +12 V, 3,3 V, 5 V the auxiliary voltage, the CPU core voltage and the
CMOS-battery are monitored.
If the voltage lies outside the specified tolerances, an error message is generated. This is indicated
optically by the flashing of the Health LED on the control panel. In addition, an entry is generated in
the BIOS Error Log.
Advantages of hardware system monitoring
With hardware monitoring - regardless of the operating system and processor - the advantages
compared to conventional software monitoring are clear:
−
suitable for all operating systems and processor types
−
no additional load on processor (performance)
−
optimum temperature protection, even if process faults or faults are present in the
operating system
−
optimum noise reduction
IDE connector
Ê
The system is equipped with two independent ATA/100 interfaces.
The Chip disk is always to be connected on the Primary IDE connector.
The CD-ROM/DVD/CD-RW drive is to be connected on the Secondary IDE connector.
LAN connector
This mainboard has an Intel gigabit LAN controller ( This LAN controller supports the transfer rates
of 10 Mbit/s, 100 Mbit/s and 1 Gbit/s. The LAN controller is equipped with a 3 KB transmission and
receiving buffer (FIFO) and supports WOL function through Magic Packet
ä
.
In addition, Bootix LAN BootP and Intel PXE are also supported (support of systems without hard
disks).
Basic AOL II is also supported. Basic AOL II helps to protect systems against theft or damage.
Basic AOL II can also inform the administrator about hardware faults and software errors.
The LAN RJ45 connector is equipped with a yellow and a green LED (light emitting diode).
1 2
1 = Yellow indicator. a connection exists (e.g.
to a hub).
2 = Green indicator:
Link Mode: the LAN connection is active.
WOL mode:
a Magic Packet
TM
is being
received.