Fujitsu Siemens Computers CELSIUS Mobile H210, Руководство по эксплуатации, Страница: 64 / 123

Security functions
54 A26391-K154-Z120-1-7619, Edition 2
Assigning the supervisor password
The setup programme can be found under Start - AddOn .
► Double-click on the symbol to start the setup programme for FJSECS.EXE .
The programme starts.
or
► Enter the programme name FJSECS.EXE under Start - Run .
► Click on OK .
The programme starts.
The program instructions will help you configure the password.
You see a field with five lines and 4 keys each
with the numbers 1 to 4 for selecting your
password. You can select one number or a
combination of several numbers in each line.
► Click one to four keys in the first line.
► You can also click a key or key combination
in additional lines if desired.
Here it is important that you do not skip a
line. In the end your password consists of
one to five numbers or one to five number
combinations.
i
With a combination you must press the security keys with these numbers simultaneously
later when entering the password.
An example:
Here the combination 2, 3 was selected in the
first line, the number 4 in the second line, the
combination 1, 3 and 4 in the third line, the
number 2 in the fourth line and finally the
combination 1, 2, 3 and 4 in the fifth line.
In this case the supervisor password is then:
2/3 4 1/3/4 2 1/2/3/4