Fujitsu Siemens Computers Answers 2 MYRICA V30-1, Руководство по эксплуатации, Страница: 31 / 31

LCD TV MYRICA V30-1
A26361-K933-Z120-1-7619, edition 1 23
PC mode
Having this problem? Check the following points:
No display (power indicator does not light) ► Check whether the power cable on the
device is connected correctly.
No picture (power indicator lights) ► Check the setting of the picture signal
source.
► Alter the brightness and/or contrast until
you get a picture.
Message:
Frequency out of range
The input signal (horizontal frequency and
refresh rate) at the displayed input does not
correspond to the technical LCD TV data.
► Adjust the video frequency range using the
computer software (see documentation for
your computer or your graphics card).
Picture position is not correct The LCD TV recognises an undefined mode (see
"Technical data").
► Press the AUTO button to conduct the
auto-adjustment of the LCD TV.
► Set the picture position with the OSD menu
(see chapter "Operation").
Picture is shaking ► Check whether the data cable for the LCD
TV is correctly attached to the monitor port
on the computer.
► Press the AUTO button to conduct the
auto-adjustment of the LCD TV.
Picture disturbances (vertical lines) ► Press the AUTO button to conduct the
auto-adjustment of the LCD TV.
Picture disturbances (horizontal lines, picture
noise) ► Press the AUTO button to conduct the
auto-adjustment of the LCD TV.