Fujitsu Siemens Computers AMILO Pro V7010, Руководство по эксплуатации, Страница: 58 / 100

Security functions
48
A26391-K149-Z120-1-7619, Edition 2
With Notice: Changes have been saved you receive a confirmation that the new password has been
saved.
► To assign the user password, mark the field Set User Password and proceed exactly as when
configuring the supervisor password.
If you do not want to make any other settings, you can exit BIOS Setup .
► Select the
Exit Saving Changes
option in the
Exit
menu.
The notebook is rebooted and the new password is effective. If you now want to open the BIOS
Setup
, you must first enter your supervisor or user password. Please note that you only have access
to a few BIOS settings with the user password.
Change supervisor or user password
► Open the BIOS Setup again and there the Security menu.
When changing the password, proceed exactly as for password assignment.
You can only change the supervisor password when you have logged into the
BIOS Setup with the
supervisor password.
Cancelling passwords
To cancel a password (without setting a new password) run the following steps:
► Call
BIOS Setup
and select the
Security
menu.
► Mark the Set
User Password
or
Set Supervisor Password
field and press the Enter key.
With
Enter new Password
you will then be asked to enter a password.
► Press the Enter key twice.
► Select the Exit Saving Changes option in the Exit menu.
The notebook is rebooted and the password is cancelled.
With the supervisor password you simultaneously deactivate the user password.