Fujisoft WM340, Руководство пользователя

Страница: 49 / 51

WM340 User Guide Version 0.2
Copyright
©
2011 FUJISOFT INCORPORATED, All rights reserved.
CE Warning
Users have to use the connection to USB interfaces with USB 2.0 version or higher.
Caution
Risk of explosion if battery replaced aced by an incorrect type.
Dispose of used batteries according to the instructions.
Please make sure the temperature for adapter will not be higher than 45
˚
C
Please make sure the temperature for device will not be higher than 45
˚
C
The adapter shall be installed near the equipment and shall be easily accessible.
Only can use adapter as below:Adapter mfg: NetIndex Inc.
Adapter model: SWFADP-100
I/P:100-240V,50/60Hz,0.3A,O/P 5V,1.5A
The plug considered as disconnect device of adapter
Declaration of Conformity
Model: WM340
Intended use: LTE Hotspot
Complies with the essential requirements of Article 3 of the R&TTE 1999/5/EC Directive, if
used for its intended use and that the following standards have been applied:
1. Health (Article 3.1(a) of the R&TTE Directive)
n
EN 62311 :2008/EN 62209-2:2010/EN 62479:2010
2. Safety (Article 3.1(a) of the R&TTE Directive)
Applied Standard(s):
n
EN 60950-1:2006+A11:2009
3. Electromagnetic compatibility (Article 3.1 (b) of the R&TTE Directive)
Applied Standard(s):
n
EN 301 489-1 V1.9.2/-7 V1.3.1/-17 V1.3.1/-24 V1.5.1
4. Radio frequency spectrum usage (Article 3.2 of the R&TTE Directive)
Applied Standard(s):
n
EN 301 511 V9.0.2
n
EN 301 908-1/ -2 V5.2.1
n
EN 300 328 V1.7.1
All the reports of the applied standards have the Positive Opinion of Notified Body:
PHONEIX TESTLAB, K ö nigswinkel 10 D-32825 Blomberg, Germany
Identification mark:
0700
(Notified Body)
CE