9
Care and Maintenance
1
Slot Filter
Align the slot filter by placing the bottom
of the slot filter in the catches, hold it in
place with one hand, and use the other
hand to fasten each knob at the top
firmly (turn clockwise to fasten).
* When cleaning is finished, be sure to return the
power supply as before;
connect the power plug to
the wall receptacle, or switch on the breaker.
2
Rectifier Panel
Holding the rectifier panel with both hands,
place the rear of the panel in front of the
catches and in line with the mounting
guide holes. Then slide the panel back to
engage the mounting guides and attach
the catches.
Tighten the mounting screw to attach the
panel firmly.
Attaching Cleaned Parts
3
Oil Tray
Hold the tab and set the oil tray on the guide rail of
the cooker hood, then push it completely to the end.
Note
Make sure that the rectifier panel is fixed
securely. It may be a cause of dropping
if not fixed firmly.
Note
If the oil tray is not installed properly, it may result in
oil-drip, injury by dropping, etc.
Catches
Slot filter
Knob
Tighten
Catch
Mounting guide hole
Mounting screw
Rectifier panel
4
Oil receiving cover
Holding the oil receiving cover with one
hand at each end, align the slits on the
bottom panel of the body with the slits on
the cover. Swivel the top part of the cover
up and to the body in the direction shown
by the arrow. Make sure that the catches
at both ends of the oil receiving cover are
firmly latched.
Catch
Oil receiving cover
