11
Installation
1F02 2181
Note
Please use suitable accessories during installation (refer to page 6).
May add or opt for other accessories as reinforcement when necessary.
5mm
3) Using the patterned paper included, insert the washer-head wood
screws (
∅
5.1×45) 5mm into the mounting wall for the left and right
keyholes of the mounting bracket.
Allow about 5mm of space between the wall and screw heads for
hanging the cooker hood.
4) Hang the unit’s keyholes onto the installed washer-head
wood screws, and then tighten the screws.
5) Affix two washer-head wood screws into the lower,
round openings of the keyholes to secure it.
Note
Please press on the oil panel tightly while affixing it so
that it does not fall.
Oil panel
Hook
Hook
Guide
6) Attach the oil panel.
Hang the two hooks at the lower end of the oil panel
on the unit, then lift up the oil panel and align it with the
guide.
Affix the oil panel using the three screws previously
removed in Step 2).
Washer-head
wood screw
Note
The longer the exhaust duct, the lower the ventilation.
7)
Connect
∅
150 flexible tube duct or the like with the exhaust outlet.
Make the exhaust outlet secure and air-tight using non-flammable
tape such as aluminium tape, etc. (not supplied)
Flexible tube duct
Taping with non-flammable
materials (Alminum tape etc.)
These steps are not necessary when using a recycling unit, sold
separately. Please continue to Step 8) on page 12.
* Please read the installation manual included with the separately
sold unit for more information.
