Fujin FUJ-4.5 P Скачать руководство пользователя страница 15

Страница: 15 / 18

External maintenance

Wipe the ducts and other external parts clean with a dry piece of cloth, or a cloth with diluted neutral detergent.

Before storing the unit

①

Clean the filter and the exterior of the unit.

②

Empty the drain tank and let it dry completely.

③

Turn on “Ventilation” for approximately one hour to let the internal parts dry completely.

④

Cover the unit with a suitable cover to prevent dust from gathering.

⑤

Store all the parts in a secure place so that nothing gets lost or damaged.

⑥

Clean the electric cord before storing it.

* Regarding cleaning of the heat exchanger, the sirocco fan and other internal parts, please consult with your local

dealer. If you clean the internal parts before storage, the unit can be used immediately afterwards.

Note:

Store the unit in a vertical standing position. Do not store it lying down.

** If the unit is stored lying down, the compressor or other parts can break down or malfunction.

8 Safety inspections

Important: To ensure safety, read section one “1 For your safety!” first.

To ensure safe operation, please perform the following inspections before use.

If any fault or malfunction is discovered, please take measures immediately.

Inspection

Measure

Is the electric cord damaged or deformed?

Change the cord after having consulted with an

Note

Be very careful if you use thinner, benzene,

chemicals or polishing powder or similar substances when

cleaning the unit. You can easily damage the coating or

cause malfunction.

Содержание FUJ-4.5 P



















Результаты поиска

Содержание FUJ-4.5 P

Отзывы:

Бренды по названию

Популярные бренды

Fujin FUJ-4.5 P, Инструкция по эксплуатации

Результаты поиска

Содержание FUJ-4.5 P

Отзывы:

Бренды по названию

Популярные бренды