FI - 361 user manuals
32
When you install a wireless network, please note the following:
Place your router or access point in the center position
Verify that your router / access point on the center position of the network,
in order to get the best results. Try to place the router / access point to the
highest point in the room, so that the signal can be distributed to your
room.If your home is a two‐story building, you need to install the repeater
signal expanding coverage.
Eliminate
interference
Household appliances, such as cordless phones, microwaves, and
televisions as far as possible from the router / access point. This will
greatly reduce the electrical interference caused by the work of the same
frequency.
Security
Prevent your next door neighbors or intruders connect to your wireless
network. Open the router's WPA or WEP security features to protect your
wireless network.Please refer to the product manual to set the properties
detailed information.
Wireless
Security
This section describes the different levels of security you can use to protect your
data from intrusion. .
ipc1 provides the following security types:
• WPA‐PSK (pre‐shared password)
• WEP (Wired Equivalent Privacy)
What
is
WEP?
WEP means Wired Equivalent Privacy. It is based on the IEEE 802.11 standard,
using the RC4 encryption algorithm. WEP for data encryption on your wireless
network to provide security, so that it can protect the security of transmission
from one wireless device to another.
To access the WEP network, you must know the key. The key is the string you
create. Using WEP, you must specify the level of encryption. The type of
encryption determines the key length.128‐bit encryption key is longer than
64.Key input HEX (16 hex ‐0‐9, AF) or ASCII (American Standard Information
Interchange Code ‐ alphanumeric characters) format string definition. ASCII
