23
Alkaline ionized water
Use the
「
alkaline ionized water
」
from the delivery pipe after pushing alkali button,
strong alkali button.
・
・
・
・
・
(Caution)
「
Strong alkaline ionized water
」
is not drinkable.
Keep and use
「
Acid water
」
from drain hose.
●
Acid water
Use
「
acid water
」
from delivery pipe after pushing acid button.
Alkaline ionized water come from drain hose but it cannot be used since pH is too high.
●
Purified water
Use
「
Purified water
」
from delivery pipe after pushing purified water button.
Do not use the purified water from drain hose.
Purified water also can be used when the power is turned off. (Not for ionized water)
※
Cartridge life-time doesn't count when the power is turned off. If it keep using
「
purified water
」
with power off, it may cause a difference for the period of cartridge exchange.
●
●
●
●
●
(Caution)
When using
「
acid water
」
, if water amounts are much less(
※
1), pH may be lower than
displayed pH.Digital display says pH5.5 but check with the pH testing liquid.
※
1 Much less water amounts refers to 1.5/min or a cup of water per 6 seconds.
Check with ORP
Display the ORP*(indication) of creating water when push the ORP button while alkaline
ionized water, acid water is running.
※
ORP is displayed the value under the particular condion. It is not the measured value
of actual created water. (Actual value may be different depends of water quality.)
●
ORP display button
ORP display lamp
Precaution for use
When use this product in the area which the water hardness is high, run acid water for
about 1 minute before using every day.
(Water runs worse because calcium adheres to spout or conduit)
※
The area which water hardness is high: the bubbling of a soap is getting worse or
white substances(calcium) adhere to kettle or pot.
The water which contains salt such as seawater or well water (near coast) doesn't go through.
Do not lift the product with holding delivery pipe or cartridge.(It may cause malfunction.)
How to use
ORP value is displayed and ORP display
lamp lights on at digital desplay part while
pushing ORP display button when water is
running. pH is displayed when release the
hand from the ORP button.
When stopping the purified water mode, ORP
value is not displayed even if ORP display
button is pushed.
