25
Insert the roll of film. Keep the long end of the spool in the film cassette at the top
of the film compartment as shown in the drawing.
3
4
A
: FILM TIP mark
B
: Film take-up spool
C
: Film cassette
While holding the film cassette in place, pull the end of the film out to the FILM
TIP mark and place it on top of the spool.
∗
Hold the film cassette down so that it does not pop out of the film compartment.
∗
Make sure the end of the film is correctly threaded onto the spool.
∗
If you should pull the film out too far, remove the film cassette and rotate the longer end of
the spool slowly to rewind some of the exposed film and adjust the leader to the correct
length to reach the FILM TIP mark. Be careful not to rewind the leader completely into the
cassette.
A
B
C
