FujiFilm Techno-Stabi TS12x28, Инструкция по эксплуатации

Страница: 16 / 56

EN-8
ENGLISH
Using the Binoculars
1
Rotate the battery-chamber latch to the left, remove the battery-cham-
ber cover, and load the batteries. Replace the battery-chamber cover and
latch it by rotating the latch to the right.
d
CAUTION
The binoculars ship with a battery inserted. Remove the
insulating sheet before use.
2
Adjust the eye height by rotating the eyecups. Retract the eyecups if you
wear glasses and extend them if you do not.
3
Set the power switch to “ON”. The system will start up, the image stabilizer
will engage, and the power LED will light.
4
With your eyes to the binoculars, adjust the eyepiece width until the views
in the right and left eyepieces overlap in a single circle.
5
Looking through the left eyepiece with your left eye, rotate the focus con-
trol until your target is in focus. Then, looking through the right eyepiece
with your right eye but without rotating the focus control, rotate the di-
opter adjustment control until your target is in focus. Finally, confi rm that
your target is still in focus when you look through the eyepiece with both
eyes.
6
When you have fi nished using the binoculars, set the power switch to
“OFF”.
d
CAUTION
The product features a ten-minute auto-off timer. The
binoculars turn off ten minutes after the power switch is set to
“ON”. To continue using the product, set the power switch to
“OFF” and then back to “ON”.