FujiFilm SP-3000, Настройка и обслуживание состояния

Страница: 41 / 48

41
5
5. SPECIAL PRINTING FUNCTIONS AND USE OF MAINTENANCE MENU
5.1 When a New Multi-film Carrier/
Mask is Used
When a new multi-film carrier MFC10AY or mask is used, set up
the condition in accordance with the table below.
5.1.1 MFC10AY Monitor Frame Ratio Setup
(Menu 0426)
1. Click the [Setup and Maintenance]
→
[04 Carrier Adjustment/
Maintenance]
→
[0426 MFC10AY Monitor Frame Ratio
Setup] buttons.
2. Select the carrier ID.
3. Set all monitor frame ratios to 98%.
NOTE: Set the monitor frame ratio to 95% for 135F/H/P/
mount, IX240/mount and110, and 98% for other
films.
4. Click the [Storage] button.
• The changed data is saved.
5. Click the [OK] button.
6. Click the [Close] button.
• Operation returns the menu screen.
5.1.2 Focus Position Adjustment (Menu 0321)
1. Click the [Setup and Maintenance]
→
[03 Scanner
Adjustment/Maintenance]
→
[0321 Focus Position
Adjustment] buttons.
2. Install the multi-film carrier MFC10AY.
Z 2 075
3. Install the mask to the carrier.
NOTE: Use the mount holder without film for the mount
mask.
• Carrier ID, carrier type, mask type and position adjustment
value are displayed.
No. Maintenance Menu See Subsection
1
0426 MFC10AY Monitor Frame Ratio
Setup
4.5.8
2 0321 Focus Position Adjustment 4.4.3
3 0420 Mask Position Adjustment 4.5.2
Multi-film
Carrier
MFC10AY
5.1
5.1.1
5.1.2
SP3000_instruct_E.book 41 ページ ２００７年１２月１１日 火曜日 午後１時６分